The smart control for your dimmable lighting - flexible and convenient to operate
With the Bosch Smart Home Dimmer, you can easily convert your existing on/off switch into a smart dimmer and use it to control any dimmable lamp.

Simple solution
Upgrade your switch with our smart dimmer to use as many dimmable lights as you like and enjoy the best possible light in every situation.

Intelligent dimming
Use scenarios or automations to automatically adapt the lighting to your needs - for example, to slowly dim the light up when you wake up or to create a cozy atmosphere when the sun goes down.

Convenient operation
The choice is yours: simply tap the button or operate by voice command or via the app.

Childproofing & protection functions
Use the practical childproofing function in the Bosch Smart Home app. Use it to lock the manual button on your new Smart Home dimmer.

Additional safety: By constantly monitoring the device temperature of your smart dimmer, overheating or overload are detected immediately. The system switches off automatically and you are informed directly via the app.

Features:

• Control the brightness in your home with the Bosch Smart Home Dimmer
• Enables intelligent control of non-smart, dimmable lamps in your home
• Alternative to purchasing smart light bulbs
• Can be controlled manually on the wall, via the Bosch Smart Home app or voice control
• Includes child safety lock and overheating protection
• Note: Can only be used in combination with the Bosch Smart Home Controller or Controller II

Requirements and installation:

The smart dimmer controls dimmable LEDs from 5 - 120 W as well as halogen and incandescent lamps from 10 - 200 W.

Please note the following:

• The dimmer is compatible with almost every dimmable light source. You can set the dimming principle (leading edge and trailing edge phase control) and the dimming range in the app
• For installation in flush-mounted boxes, a depth of at least 50 mm is required. For optimum installation, a box depth of 60 mm or more is recommended
• A permanent 230 V power supply with conductor and neutral conductor is required to power the dimmer
• Outdoor use only possible in a weatherproof installation box (e.g. IP66)
• The dimmer may only be installed by authorized specialist personnel

Technical data:

• Protection class: IP20
• Protection class: II
• Device protection: Temperature fuse and current monitoring
• Ambient temperature: - 25 °C ... + 50 °C
• Housing dimensions (W x H x D): 40.5 x 47 x 22 mm
• Weight: 34 g
• Radio frequency band: 2.4 - 2.4835 GHz
• Radio protocol: ZigBee 3.0
• Max. Transmission power: 10 dBm
• Radio range in open field: < 70 m
• Software class: A
• Receiver category: 2
• Supply voltage: 230 VAC / 50 Hz
• Power consumption: idle mode < 1 W
• Cable type and cross-section: Rigid and flexible cable, 0.75 - 2.5 mm²
• Control: leading edge and trailing edge phase control
• Color: white